Manticore Crossmembers

Added onto my 4-post rack to make it a 6-post. Used the 24” for depth and the 43” across the top. Love having the options with all the holes. It even came with more bolts that I wasn’t expecting.

Purchased BoS crossmembers and uprights to use with some Rogue uprights that I already had to make a full 4 post rack. The shipping was pretty quick and everything was packaged well so that nothing was damaged en route. Bells uses the same imperial measurements as Rogue, so everything lined up perfectly during assembly. There are a few quirky things that I noticed in mixing and matching. Nothing negative, just differences between companies to be aware of: -Numbering is different; Bells numbers all of the holes on crossmembers and uprights, Rogue doesn't. On uprights this means safeties or j cups are going to be at different numbers at the same height. -Rogue top crossmembers have a different design (flush with top of upright) so the lower bolt goes through a different hole in the upright than the Bells crossmember. This doesn't affect stability or anything but having two top crossmembers that are different means they are not even with each other. So i will need to get another one to make them match if I want to add a Darko anchor or something. -Least important, the "black" of the Bells crossmember is gray. Not nearly as nice as the satin black from Rogue- but i saved some money and they are just as strong and will function just as well.