This is yet another purchase I made on the basis of Gym Radar's glowing reviews! I was tired of the DIY set up for chest supported rows and decided it was time to get a specialty bar dedicated for that purpose. Given that it's from Titan, the build quality is surprisingly good. Based on the comments made in the reviews below, there seems to have been an evolution in the bar, e.g. mine weighs just a tad over 50 lbs empty, whereas some reviewers mention the empty bar weighing 60 lbs. The knurling is definitely "there," but by no means aggressive. It feels like what an aggressive knurling would feel like after it's been filled in with thick powder coat. The bar is solid - literally - and will likely survive generations. The special bent handles allow for full ROM during chest supported row movements, which is what I wanted. Whether it will be worth the purchase depends on how much one values chest supported/ seal rows. For this is a "one trick pony," albeit one that performs the trick really well.

For my set of fixed metal hex dumbbells, I have a three-tiered rack that stores the 10 lb - 50 lb pair (increasing in 5 lb increments). But I was left with an odd assortment of heavier dumbbells that simply lay on the floor. And that bothered me, so I went looking on FBMP for a deal on a suitable rack. This DIY fabrication caught my eye and I waited until the price dropped from the initial $50 to $20, at which point I contacted the seller. She seemed ecstatic that someone - finally - was going to take it off her hands. But she sent me a warning message that, "It is very heavy and I can't help you move it." No problem, I thought. I lift heavy things in my gym so I can lift heavy things outside the gym. When I saw it in person, however, I was shocked at how "beefy" or "heavy duty" it looked - and felt. I tried to pick it up with one arm, and I failed the lift! The woman's son - a big strapping lad around 6 ft 4 in tall and weighing about 250 lbs - was nearby and I gave him a look that said, "Can you help me carry this, bro?" She seemed to have read my mind, because she told me, "Sorry that my son can't help you lift it. He has a hernia." Damn my bad luck! I asked her who made it or where she found it, and she replied that her husband welded it. From the way she looked as she said "husband," I got a sense that they may not be together anymore, so I didn't ask for more details. I just told her that "he built a monster." She forced a smile. The time came for me to summon my inner Tom Haviland and I Zercher carried the rack to my car about 25 yards - the longest 25 yards of my life! I loaded it into my SUV with another herculean effort. When I brought it into my garage, the straggler dumbbells I had fit perfectly within the rack. Despite this, I'm docking couple of stars for performance because you actually have to be pretty strong to load or unload dumbbells onto or from it! At least my heavier dumbbells now have a home, and I have an interesting conversation starter.

This is my promised review of the Ritfit mini deadlift jack. After using it for two deadlift sessions, I already love this jack. For a mini deadlift jack in the style of KB's Genesis jack - which many are starting to emulate - it is surprisingly stable. I think that's due to its heft (about 4 lbs) and the width of its foot (4 inches wide). I also have AbMat x KB's Evo jack, and it tended to sway laterally when plates are loaded, especially at heavier weights. The foot of the Ritfit jack is 1.5 inches wider than Evo's and - as many men can vouch for - that extra inch and a half makes a huge difference in performance. The welds look clean and solid, and I have no doubt about its stated weight capacity of 660 lbs (that is per side). There the obligatory UHMW on every point where the bar will make contact with the jack. For around 40 dollars, shipping included on Amazon Prime, there's probably not a better mini deadlift jack out there on the market today.

Due to the limitation of space, I recently sold off my full deadlift jack from Titan Fitness and replaced it with two mini jacks: this one, and the one from Ritfit (a review of that one forthcoming). Though extremely light weight (baby!), this jack is very tough. I jacked up five 45lb plates per side with ease. After the test, there was hardly an indent left on the"hook" portion of the jack from the knurling of my deadlift bar. Whatever the "specialized molded composite material" happens to be, it is very strong, and I suspect it will last a long time (though that remains to be confirmed over time). Also, the jack simply looks beautiful, being one seamlessly molded piece. The only issue I had with the jack is that, due to the narrow footprint, it tended to move laterally as I loaded more plates. As such, I would be careful when loading the plates so as not to topple it sideways. (This is a feature that full deadlift jacks have over these mini jacks!)

Spud Inc solidifies their justly famous reputation for me with this strap. I have Titan economy "reverse hyper" (economy H-PND) and it comes with a strap that makes the experience of using it less pleasant. It tends to dig into one's ankles during use and I've sort of learned to associate that as part of doing the exercise. However, after replacing that default strap with Spud Inc's, I can say that the quality of the strap makes a huge difference in the quality of the movement. As a result, the machine functions less as a table these days and more for its intended purpose. If you have a Titan "reverse hyper," ditch its strap and upgrade to Spud's!

This is another purchase I made based on glowing Gym Radar reviews. I've had it for two weeks now and it has become my "daily driver" in terms of collars. There's very little I can fault it for in terms of design and function. It has a wicked "snap back" effect when unlocking, so be careful that you don't have fingers in the way of the clamp. I've seen reviews that its magnet is too weak, but I find mine to be pretty strong (maybe it's been upgraded since those reviews?). I do wish that the magnets were placed inside the collars rather than at the edge, so that it can stick snugly to my iron plates - but this is a very minor complaint. It clamps tight enough so that it can be used on specialty bars (e.g. with 1.9" diameter), which was a nice bonus. Highly recommended!

I tried to add this piece of equipment that I got from Amazon, but I didn't remember what it was called. And I didn't want to search through my purchase history just to find it. Then I see it flash before me as I scrolled through Gym Radar's feed! This goes to show how extensive the equipment listing on the site has become. Now for the review of this product, which can be brief. Its build quality is excellent for how much (or how little) you'll spend on it. I like to use it "upside down" with swivel shackles for extra ROM. With apologies to BWTG, this is a useful "lat bar with holes."

I just picked up a 25 lb pair of these plates secondhand and made sure to weigh them first before buying (yes, I am that guy). They both weighed 24.6 lbs, which is good enough for me, and I appreciate them both weighing the same. I'm firmly in the "weight is weight" camp and don't really care about aesthetics. (There's one exception: 45 lb plates that are not the standard diameter, which can mess up one's deadlift prep.) Simply put, those who need their plates to look more like Henry Cavill than Will Farrell should look elsewhere. These are hunks of iron that have mass, are close to their stated weight, and can be loaded onto a barbell to help me get strong - and that's good enough for me and my house. And they were cheap - I negotiated them down to about 60 cents per pound. Lift hard, live easy!